AC Infinity UIS Accessories

The Small Parts That Keep a Bigger UIS Setup Tidy and Working

Once you're running more than one tent, or more devices than a single controller port was really designed for, you hit small gaps that the standard box contents don't cover. Each of these solves a different one.

The 4-Way Splitter Hub is for when you've got several identical devices that are happy running the same programme, say, four clip fans all set to the same speed schedule. Plug the hub into one controller port and it shares that single programme across up to four devices, and you can chain hubs up to three tiers deep for bigger setups. Worth knowing: devices on a splitter share one programme rather than running independently, and if you're on a Controller AI+, you'll lose device-exclusive functions like oscillation control on that port.

The Wireless UIS Connection solves a different problem entirely: getting a cable from controller to device when there isn't a sensible route for one, through a wall, across a room, or into a second tent. It's a transmitter and receiver pair that links over 2.4GHz up to 26ft away, even through walls, with the same millisecond responsiveness as a wired connection, and it doesn't rely on your WiFi or internet to keep working.

The Male to Male and Female to Male cables both add 10ft (3m) of reach between a controller and a UIS device, and both work with the full UIS range, CLOUDRAY, CLOUDLINE, IONFRAME, CLOUDFORGE and more. The difference between them is simply the connector at each end, so check what's already on your controller port and your device's cable before ordering. If you're not sure which you need, get in touch and we'll help you match it up.

The Power Pack and Control Plug are straightforward replacements: a lost or damaged power adaptor doesn't mean buying a whole new controller, and a worn control plug doesn't mean replacing the device it's attached to.

• 4-Way Splitter Hub – shares one controller programme across up to 4 devices, chainable up to 3 tiers
• Wireless UIS Connection (2 Pack) – 2.4GHz transmitter and receiver, up to 26ft range through walls, no internet required
• Male to Male Cable (10ft) – extends reach between controller and device, compatible with the full UIS range
• Female to Male Cable (10ft) – same 10ft extension with the opposite connector configuration
• UIS Controller Power Pack – genuine replacement adaptor, no need to replace the whole controller
• UIS Control Plug – replacement plug for a worn or damaged cable end

Not sure which one you need?

If your devices already share one setting and you're just out of ports, start with the Splitter Hub. If running a cable isn't practical, go wireless instead. If your existing cable is simply too short, one of the extension cables will sort it, just match the connector ends first. And if something's broken rather than missing, replacing the Power Pack or Control Plug is far cheaper than replacing the whole unit. Pair any of these with a Controller AI+ or Controller 69 Pro if you're building your setup from scratch.