Excellent 
G.A.S. EC Fan Active Cable – 5m
This cable sends a 10V signal from the fan to power your controller – no extra power supply is needed to run your controller.
Suitable for:
You can use this cable with other fans, but your fan won’t be able to power your controller – you will still need an extra power supply for your fans.
DO NOT USE with a G.A.S EC controller or G.A.S HyperFan Multi-Phase Controller – your fan will simply switch off.
G.A.S EC Fan Male-Male Lead – 5m
When using this cable, your controller will still need connecting to a power supply, as they are not powered by your fans.
Suitable for:
G.A.S EC Fan Y-Splitter Connector
Allows controller to connect to 2 x male-male leads.
Y splitters can also connect to each other. This means you can daisy chain them together if you want to connect multiple fans to one controller. Make sure you don’t try to connect too many fans though!
- G.A.S Thermostatic Speed Controller (EC1)
- must use with active cable
- supplied with one active cable
- G.A.S EC Speed Controller (ECSP)
- must use with active cable
- supplied with one active cable
- G.A.S Enviro Controller
- Use with male-male lead
– does not come with any cable
- G.A.S HyperFan Multi-Phase Controller
- must use with male-male lead
- male-male lead supplied with fan, but not controller
If running two fans at the same speed, using this controller, you will also need:
1 x extra male-male lead, 1 x Y-Splitter
- G.A.S Enviro Controller
- Revolution Vector fan: use male-male lead
- HyperFan: can use male-male lead supplied with controller
- G.A.S EC Controller
- must use with male-male lead
- comes with male-male lead
If running two fans at the same speed you will need 1 x extra male-male lead, 1 x Y-Splitter
If running two fans at different speeds, you will also need: 1 x extra male-male lead, 1 x balancer
Questions & Answers
Have a Question?
Be the first to ask a question about this.