Telos 10 Pro LED 1m x 3m x 2m Complete Kit

Pre-order from our incoming batch of Telos 10 Pro LED Grow Lights - arriving 16th - 18th July!

Get an epic LED light layout in a 1m x 3m x 2m area with this kit. 

• No heat problems – 3 x 285W LEDs
• Low energy + low running costs
• High PAR output (equivalent of 1100W HPS)
• Maximum yield size & quality (broad spectrum LED)
  
  

You get 3 x Telos 10 Pro LED light - they're known for having a high PAR output and broad spectrum!

You get:

• 3 x Telos 10 Pro
• 2 x Telos H-Connector
• 2 x Telos Link Cable - 2m
• 1 x BAY6 1m x 3m x 2m Grow Tent
• 1 x 150mm extraction kit (fan + power cable + ducting + filter + duct clips)
• 1 x 5m Chain
• 5 x ‘S’ Hooks
• 1 x Heavy Duty Timer

BAY6 is a huge bargain, but BudBox has by far the better build.

• Silver interior: 95% reflective silver mylar
• Strong frame: metal poles + plastic corners
• Easy access: multiple draw string ports
• Bargain: decent build for low cost

The difference between each kit is the fan and filter.

You don't need to wire your fan - it's plug & play. You can also flip between two speed settings. 

Moves 398m³ or 517m³ per hour

• 1 x 150mm RAM Mixed-Flow Fan 
• Power cable inc with fan
• 1 x BAY6 Carbon Filter (150/300)
• 1 x 5m Combi Ducting
• 3 x Duct Clips
• 5 x S-Hooks 

You get a reliable, long-life RVK fan and a Prima Klima carbon filter. 

Moves 430m³ per hour

• 1 x RVK150A1 Extractor Fan  
• 1 x Power Cable 
• 1 x PK Carbon Filter (BF360)
• 1 x 5m Combi Ducting
• 3 x Duct Clips
• 5 x S-Hooks

Slow or speed up fans to control your grow temperature – grab a Fan Speed Controller.

• Manually adjust fan speeds
• Simple controls (large dial)
• Plug & play

• Automatically adjust fan speed (3m temp sensor included)
• 1°C temp changes
• 50 speed settings

CREE’s latest LEDs are used to create full spectrum lighting.

• XP-G3 (photo-red)
• XPG3 (white) LEDs

Overall, the colour from Telos lights is 86 CRI @ 3000 Kelvin. That’s incredibly close to sunlight, which is 100 CRI.

With such a broad spectrum, you’ll get an incredible yield size & quality

Meanwell are market leaders, known for their reliable & efficient switch-mode power supplies. They have worldwide certification.

Most LEDs…don’t have any optics. Without optics, your light spread is concentrated in the centre of your grow room, directly underneath the LED unit.

Telos LEDs…have a unique optical design. It acts like a reflector – one that doesn’t degrade.

The optics are made from plexiglass, which has 94% light transmission!

Each optic is made of 24 smaller optical lenses. These are used to cover two LED boards (12 LEDs per board).

Each optic captures the light emitted from the LED and distributes it evenly. Overall, you get uniform coverage, and you don’t need as many LEDs to cover the same area evenly.

No noisy fans are needed to keep your unit cool. Instead, heat is passively vented up and out of your unit via an extruded aluminium heat sink

Heat is quickly conducted from your unit, into this heat sink, thanks to the graphite thermal conductive interface materials in each Telos. This material is far more conductive, consistent and clean than the silicon grease most LEDs use. 

Silicon gaskets are fitted around the optics to keep it waterproof.

All screws are made of stainless steel, and coated in a specialist nonconductive coating to stop any corrosion between the different metal materials if the unit becomes wet.

In a humid grow room, this is exactly what you need.