Maxibright Focus CDM Connect Reflector
Run your CDM light in a 0.8m x 0.8m - 1m x 1m area with the Focus reflector.
This one's the connect reflector - your ballast connects directly to it.
- Closed-end CDM reflector
- Connects directly to your ballast
- Compact - 30cm x 30cm x 11mm (covers 0.8m x 0.8m - 1m x 1m area)
You can use it as part of a standalone or supplemental CDM light system, the choice is yours. Either way, plants will be exposed to a broad light spectrum with lots of UVA & UVB to boost yield quality.
Compact - 30cm X 30cm X 11cm (L X W X H)
You can easily retrofit it between two HID lights.
Wide, Uniform Coverage
You get a focused footprint of 0.8m x 0.8m - 1m x 1m.
21.46% More Light On Target
Maxibright ran some tests and found you get 21.46% more light on target than if you use a standard Maxibright Daylight Reflector
Connects To Ballast
It's easy to attach your ballast - there are two simple fixing points, and a shortened IEC cable. A couple of clicks and you're ready to go.
Built In CDM Lampholder
You can screw your CDM lamps straight in!
Maxibright Focus Vs Similar Model
Maxibright found that the Focus reflector gets 21.46% more light on target than the Maxibright Single Daylight Reflector V3!