Lumatek Full Spectrum LED Bar Grow Light - 100W
Pimp your propagation tent or increase the LED light in your main growing area with a fantastic 2.9 µmol/J Lumatek Full-Spectrum LED Bar!
Using the same top bin Osram and Lumiled LEDs as the best selling Lumatek Zeus 2.9, these high quality bar fixtures feature a remote driver and can be used to either supplement an existing Zeus fixture with additional light or as a standalone unit for propagation and veg areas.
- High PPF output for high intensity 295 µmol/s
- Very high efficacy of up to 2.9 µmol/J
- High quality Lumatek 100W LED remote driver included
- New Clear Glue protection cover technology on the LED bar
- Top bin Osram and Lumiled LEDs
- Balanced full spectrum
- External control with Lumatek Control Panel Plus 2.0 or Universal Controllers 0-10V
- Fully Dimmable
- User friendly Plug & Play Assembling
- 5 Year Manufacturers Warranty
- Industry Leading £/ µmol ratio
- IP65 rated
Using these bars in propagation if your final growing space uses the Lumatek Zeus is a fantastic idea as your plants will grow and develop not only at their optimum potential but also using the exact same spectrum of light that they will use under the Zeus. This reduces any growth shock when moving to the main tent and gives your young plants the perfect basis to push on from.
Each bar is 115cm long and has an effective growing footprint of 120cm x 25cm, although in practice as a propagation light these work perfectly in a BAY6 DP 130 tent covering 2-3 propagators. The total light output is 295 µmol per unit offering an impressive level of light for the input wattage.
Each bar is supplied with a remote dimmable driver, letting you keep the controls of the light outside of your growing space and giving you the ability to dim the unit using an external 0-10v controller. Multiple lights can be connected in series to cover a larger area using a Lumatek daisy chain cable. Please note, that in order to dim these individual bars, they must be either connected to a controller or used in series from an existing dimmed lumatek fixture. They do not feature their own manual dimming dial, although in practice the right intensity can be achieved by altering the mounting height.
As with the Lumatek Zeus, Clear Glue protection cover technology on the LED bars gives light transmittance of 99% without light loss, maximising the lifetime of diodes. It also gives extra corrosion resistance and waterproofing up to IP65 standard. Perfect for high humidity propagation and veg environments.
This Lumatek LED fixture can also be externally controlled with a Lumatek digital lighting controller (Digital Panel Plus 2.0) featuring light timing, automated dimming (1% increments), temperature safety control, Sunrise & Sunset Mode for up to 100 fixtures per controller.
Universal Control Systems Compatibility
Lumatek LED Fixtures can be fully controlled with either the Lumatek Digital Panel Plus 2.0 or with any other Control System that utilises 0-10V output signal. Even if your Universal Controller has an RJ port interface, you can still run our LEDs by using a signal converter RJ to 0-10V control adaptor.
EFFICACY: up to 2.9 μmol/J
PPF: 295 μmol/s
INPUT VOLTAGE: 220-240V, 50-60Hz
INPUT POWER: 102W (±2%)
LIGHT DISTRIBUTION: 120º
LIGHT SOURCE: Osram & Lumileds Diodes
DIMMABLE: With 0-10V Light Dimmer (Sold Separately)
EXTERNAL CONTROL: With Lumatek Digital Panel Plus 2.0 or Universal Controllers 0-10V
THERMAL MANAGEMENT: Passive Cooling
DIMENSIONS: 1148 x 20 x 53mm
SPECTRUM: Full Spectrum +