Run your CDM light in a 0.8m x 0.8m - 1m x 1m area with the Focus reflector.
This one features the connect reflector - your ballast connects directly to it.
- Lamp: 315 Watt Philips CDM Lamp (942 or 930)
- Ballast: 315 Watt Maxibright Daylight CDM Ballast
- Reflector: Maxibright Focus Reflector (connected reflector)
You can run it as a standalone or supplemental light, the choice is yours. Either way, plants will be exposed to a broad light spectrum with lots of UVA & UVB to boost yield quality.
Compact - 30cm x 30cm x 11cm (L x W x H)
You can easily retrofit it between two HID lights.
Wide, Uniform Coverage
You get a focused footprint of 0.8m x 0.8m - 1m x 1m.
21.46% more Light on Target
Maxibright ran some tests and found you get 21.46% more light on target than if you use a standard Maxibright Daylight Reflector
Connects to Ballast
It's easy to attach your ballast - there are two simple fixing points, and a shortened IEC cable. A couple of clicks and you're ready to go.
Broader Light Spectrum (more UVA & UVB)
Plants will smell, look & taste better (more essential oils, terpenes & flavonoids). You end up with bigger, bushier plants with more flowering sites and larger root systems.
Built in CDM lampholder
You can screw your CDM lamps straight in!
Maxibright Focus vs Similar Model
Maxibright found that the Focus reflector gets 21.46% more light on target than the Maxibright Single Daylight Reflector V3!
Choose Your Lamp
With either lamp, you're going to get excellent results.
315W Philips MasterColour 942 Daylight CDM Lamp
- 1.7 micromoles (µmol) per Watt
- Bluer light spectrum
- Supplemental light only
315W Philips Greenpower 930 Agro CDM Lamp
- 1.9 micromoles (µmol) per Watt
- Fuller light spectrum
- Can be used as a supplemental or standalone lamp
- Q & A
Questions and Answers