1000W Adjust-A-Wings HELLION Defender Lighting System
Overview
Increase PAR output with a 1000W Adjust-A-Wings HELLION Defender Lighting System.
It’ll sit as low as 60cm from your canopy without burning plants. With this low hanging height, you lose less light to walls -instead, you get high PAR, uniform coverage without causing heat stress.
- Adjust-A-Wings Defender Reflector (Large -100cm x 70cm)
- Remote or connected ballast (parts included for both)
- High PAR Output - PPF = 2100μmol (at 1000W), 2350μmol (at 1100W)
- Long PAR maintenance – extended 16,000hr lamp life
- Super-spreader included (no hot spots)
You can run your lamps at 600W/ 750W / 830W / 1000W / 1100W thanks to the dimmable digital ballast.
To trigger growth, recreate spring, summer & autumn with your reflector. There are 3 x wing positions and 5 x lamp heights so you can mimic seasonal light & heat fluctuations.
High PAR Output
Lamps have a high PPF of 2100μmol (at 1000W), 2350μmol (at 1100W).
That's one of the best PAR outputs for HPS lights! To get it so high, the very best Japanese & USA components are used.
400V Dimmable Digital Ballast
You can run it at 600W/ 750W / 830W / 1000W / 1100W. For accurate colour rendering, ballasts run at super high frequencies - they're 400V!
Adjust-A-Wings Defender Large Reflector!
It's 92% reflective, titanium white coated to make it heat resistant. It’s 100cm x 70cm.
Double Ended Lamps
You get a really even burn across your lamps and colour rendering is accurate. It's also easy to position your lamps precisely.
Tweak Your Light & Heat Intensity
There are 3 x wing positions and 5 x lamp heights. Remember, you can dim your ballast, too.
No More Bright, Hot Spots (Super-Spreader Included)
You can get much closer to plants without burning or stretching them, thanks to the included Super Spreader.
Flexible Layout!
Hang your lamp, ballast & reflector together. Or to save space, keep your ballast outside your grow room.
Kit Contains
- Adjust-A-Wings Defender Reflector (Large – 100cm x 70cm)
- HELLION DE 1000W HPS Lamp
- HELLION DE Lamp Adaptor (adjustable)
- HELLION DE 1000W Ballast
- HELLION 1000W Reflector Connector (for large Adjust-A-Wings)
- HELLION 1000W Reflector Connector (for large wings)
- Super Spreader
- 2.5m Input Power Cord
- 3.5m Extension Cord
- Large Wing Adaptor Kit
- Assembly Instructions
Why Use A Super Spreader?
To stop bright, hot spots building under your lamp, a Super Spreader is included.
With one attached, growth is uniform, so you get a nice even canopy and bigger overall yield. You can bring your light much closer to plants without burning or stretching. If you haven't got much headroom, they're a must.
Normal Reflector
Adjust-A-Wings + Super Spreader
Mimic The Seasons With Your Reflector
To trigger the right growth at the right time, use your reflector to mimic spring, summer & autumn.
Spring
When: veg growth, Wings: narrow
Lampholder: low, Distance: 75-90cm
For uniform growth, create warm, even light patterns with a moderate intensity.
Summer
When: flowering, Wings: wide
Lampholder: high, Distance: 40-60cm
Trigger flowering deep into the foliage with high intensity light and summer temperatures.
Autumn
When: maturing Wings: mid
Lampholder: mid Distance: 60-75cm
Enhance and balance essential oils as plants mature with autumn settings.
Ballast Tech Specs
Operating Parameters
| 1000W Adjust-A-Wings HELLION DE Defender Ballast | |
|---|---|
| Current at 1000W | 208 V/ 5.4A 240V/ 4.6A 277V/ 4.0A |
| Output wattage | 600W / 750W / 830W / 1000W / 1100W |
| Efficiency | > 92.5% @240V AC |
| Ignition voltage | < 4.5KV |
| Ambient operating temperature | -20°C to 50°C |
| Max case temperature | <70°C |
| Standard | IEC 61347 |
| EMC | EN55015 |
Input And Performance Parameters
| 1000W Adjust-A-Wings HELLION DE Defender Ballast | |
|---|---|
| Input voltage | 208V to 305V AC |
| Input frequency | 50/60Hz |
| External control | 0 to 11.5V via RJ11 sockets |
| THD | <5% |
| PF | > 0.998 Non-dimmed |
| OCV | 300V |
| Weight | 4kg |
| Dimensions | 241.5mm x 177mm x 74mm |
Protection
| 1000W Adjust-A-Wings HELLION DE Defender Ballast | |
|---|---|
| Short circuit | yes |
| Open circuit | yes |
| Ignition failure | yes |
| Overheated | yes |
| EOL | yes |
| Soft Start | yes |
| Hot re-strike | yes |
Lamp Tech Specs
Output Specifications
| 1000W Adjust-A-Wings HELLION DE Defender Lamp | ||
|---|---|---|
| 1000W | 1100W | |
| Luminous Flux | 154,590 lumens | 167,480 lumens |
| CRI | 27 Ra8 | 31 Ra8 |
| PPF | 2100 μmol | 2350 μmol |
| PPF/Watt | 2.10 | 2.14 |
| Colour temperature | 2007K | 2007K |
| Rated average life | 16,000 hours | 16,000 hours |
Physical Specifications
| 1000W Adjust-A-Wings HELLION DE Defender Ballast | |
|---|---|
| Overall length | 390mm (15.35") |
| Glass base to base | 270mm (10.63") |
| Glass jacket | 320mm (12.6") |
| Glass diameter | 30mm (1.18") |
| Weight | 128g |
Intended Use
| 1000W Adjust-A-Wings HELLION DE Defender Lamp | |
|---|---|
| Socket Type | SPP0710 or equally rated double ended lamp socket |
| Socket pulse rating | 5kV |
| Fixture rating | Open/closed |
| Burning position | Horizontal ±15° |
| Bulb designation | T40 |
| Base designation | K12x30s |