Silenced Revolution EC V2 Extraction Kits

From £744.95

In stock

Grouped product items

150mm (6") Silenced Revolution EC V2 Extraction Kit (764m3/hour) Code: 6226	£744.95
200mm (8") Silenced Revolution EC V2 Extraction Kit (1345m3/hour) Code: 5943	£799.95
250mm L (10") Silenced Revolution EC V2 Extraction Kit (1787m3/hour) Code: 5939	£949.95

Overview

Save energy & move more air without making a peep - the Silenced Revolution EC V2 Kit is what you need!

It's so cheap to run you'll make back the cost of the kit within a year. After that, the savings keep adding up.

Buy this bundle and you'll get a stealthy Silenced Revolution EC V2 Fan that's been making waves since it was first launched.

1 x Silenced Rev Vector EC V2 Fan

1 x G.A.S Speed Controller (ECSP)

1 x METU Clamp

1 x CarboAir 60 Carbon Filter

1 x 5m of Combi Ducting

1 x Quick Release Duct Clips

50% Cheaper To Run

EC fans are much cheaper to run

How? They use less power at slower speeds, unlike AC fans, which always run at full power. The slower the speed, the bigger the saving.

Crazy Air Flow

The fan's body is a single piece that's completely air tight.

These fans are the first ones with directional air flow, which means the air travels down the ducting efficiently without losing pressure.

Quiet With Sound Absorbing Foam

Sound absorbing foam silences fans without restricting air flow. In fact, the super efficient air flow helps reduce noise!

No Heat Problems

To stop heat problems, the motor has overheating protection and the body is made from a unique composite material.

No Vibrations Or Rattling

The impeller is balanced to reduce vibrations. The outer casing has a rubber sealing flange so there are no rattling sounds. Each fan has 4 mounting brackets to keep the fan still when the impellar changes speed.

Small & Lightweight

They may be powerful, but these fans are wrapped up in a light, comnpact body that's easy to install.

No Temperature Spikes (RTT Technology)

If there's a sharp temperature spike, your controller builds speed quickly. If there's a slight temperature rise, it builds speed slowly.

This corrects sudden spikes quickly without overdoing it when there's only a slight change.

Running More Than One Fan?

If you only need a single fan, one of these kits will do the trick.

If you're running two fans, you can either:

Get a Y-Splitter to use 2x EC fans with the supplied G.A.S EC Fan Speed Controller
Upgrade your controller for temperature responsive fan management (we recommend the G.A.S EC5 Fan Speed Controller or the G.A.S Enviro Controller V2)
Upgrade your controller to a G.A.S EC Fan Controller and purchase the necessary extra cables/leads to create one of the below configurations

Option 1: Single Fan

For one fan, this kit is all you need

Option 2: Two Different Size Fans

You will need to buy:

1 x Rev EC Fan (a size smaller)
1 x Y splitter
1 x Male-Male lead
All available here

Option 3: Two Same Size Fans

You will need to buy:

1 x Rev EC Fan (same size)
1 x Balancer
All available here

Q & A

Write Your Own Question

Reviews