-
-
13mm Single Outlet to Tee or Elbow
Starting at: £0.85
This combination of threaded outlet fittings is the same ones we use to construct our Hydro-Duct watering kits. With 13mm barbed ends for secure connection to 13mm irrigation pipe, both the Tee and Elbow have a male threaded outlet which screws securely to the single outlet fitting. You can use this to create multiple watering points on an irrigation main or create additional nutrient delivery points on large NFT tables. -
13mm Non-Return Valve
Starting at: £5.50
Great when constructing your own DIY system or dripper. It only allows water and nutrients to flow in one direction which is perfect for drip systems where you don't want them going backwards. -
Flood & Drain Fittings
Starting at: £0.85
These adjustable flood & drain fittings are ideal for use in DIY systems or as replacements for existing fittings. For most systems you will attach the 13mm outlet to your pump as an inlet/outlet and use a larger size outlet - usually 19mm - as your overflow outlet. With each outlet you will need spacers to set the flood height and for both inlet/outlets you'll need Screens to prevent debris or clay pebbles blocking the pumps and fittings. -
8 Outlet Manifold to 13mm Tee
Starting at: £1.45
When you are creating a custom drip system for multiple pots, it is very easy to quickly become entangled in a huge mess of drip lines. This handy combination of a threaded 8 outlet manifold and matching threaded 13mm Tee make organising and constructing your drip system nice and easy. -
13mm Grommets
Starting at: £0.60
Grommets are fitted inside drilled holes to provide a secure fit for pipework. By using a grommet, you reduce or even remove the possibility of leaks and seepage from pipework joins. -
13mm - 19mm In-line Filters
Starting at: £4.50
We have 2 sizes of In-Line Filter. These are used to filter out unwanted particles from your system which may block or damage pumps or drippers. As with all home hobby irrigation and hydroponics the 13mm size tends to be the most popular. This is a 'push fit' type fitting - no special connectors or tools are required. Used primarily in DIY drip systems. -
13mm - 19mm In-line Taps
Starting at: £2.50
We have 2 sizes of In-line Taps and as with all home hobby irrigation and hydroponics the 13mm size tends to be the most popular. This is a 'push fit' type fitting - no special connectors or tools are required. These are typically used in-line and are useful for adjusting flow rates and isolating parts of your irrigation system. -
-
13mm - 19mm Irrigation Fittings
Starting at: £0.40
We have a range of secure push fit connectors that enable you to create whatever pipework and irrigation layout you require. We have tee-pices, elbows, connectors and end stops in both 13mm and 19mm sizes, all of which are compatible with both our hard LDPE pipe and flexi-pipe ranges.
Irrigation Pipe & Components
The world of irrigation fittings can seem a little daunting, but the wide array of fittings available make it possible to create pretty much any system that you can imagine. This you can improve on a commercial system? The parts you'll need are here. The same goes for if you wish to create your own custom irrigation systems - everything you will ever need is in this category. We have pipe and fittings in 4 sizes - 25mm, 19mm, 13mm and 4mm. usually a combination of these is used to create an entirely unique set-up that perfectly matches your needs. As always, for advice on choosing your fittings, visit one of our stores or call 0845 345 5178 for expert advice.
