Grid List
7 Item(s)
-
4mm Hole Punch and Nipples
Starting at: £0.18
These handy micro irrigation tools are essential for creating your own drippers and custom built irrigation systems. Use in conjunction with 4mm Irrigation Fittings to construct your own micro irrigation systems. Includes Hole Punch for making holes and 4mm Nipples for attaching 4mm pipe. -
4mm Green Micro Sprinklers
Starting at: £0.85
Green Micro Sprinklers are useful irrigation fittings which allow you to create your own spray/aeroponic systems or even custom watering systems. Exactly the same as the Micro Sprinklers used in our Aeroponic Propagators, these are quality irrigation components that have a 4mm fitting. -
Drippers
Starting at: £0.25
A selection of drip stakes for varying applications. The Blue Fast Flow Dripper is used for fast draining media such as clay pebbles. The 360 degree adjustable drip stake is used for creating a small adjustable radius spray. The 2 Litre/hour dripper is used with rockwool or coco. -
4mm Soft and Hard Delivery Pipe
Starting at: £0.35
Hard delivery pipe is only to be used with the 2 Litre per hour drip stake, whilst soft pipe is recommended for use in all other applications. -
4mm Irrigation Fittings
Starting at: £0.25
A range of secure push fit 4mm connectors for creating micro irrigation systems in whatever layout you require. Used largely in dripper based irrigation systems. -
4mm Barbed in-line Valve
Starting at: £1.00
Barbed in-line valve for use with 4mm delivery pipe. These valves are particularly useful for restricting the flow of nutrients to individual drippers or for isolating parts of your 4mm micro irrigation system. -
Custom PCB Drippers
Starting at: £0.25
If a Topspin 12 is not suitable for the 25mm irrigation system that you wish to construct, then it is possible to create your own custom drippers using a few simple tools. Because of the high flow rate of the Professional AQ7000 25mm Pump, it is possible to use a PCB (Pressure Compensating Button) which only allows liquid to flow through it at a certain pressure and at the indicated flow rate. These can be attached to 25mm ZPE using our Quick Cut Hole Gun, and from there simple 4mm delivery pipe and a Fast Flow Blue Drip Stake will complete your dripper. These PCBs will not work with smaller pumps than the AQ7000 as they do not create enough pressure.
Grid List
7 Item(s)
Irrigation Pipe & Components
The world of irrigation fittings can seem a little daunting, but the wide array of fittings available make it possible to create pretty much any system that you can imagine. This you can improve on a commercial system? The parts you'll need are here. The same goes for if you wish to create your own custom irrigation systems - everything you will ever need is in this category. We have pipe and fittings in 4 sizes - 25mm, 19mm, 13mm and 4mm. usually a combination of these is used to create an entirely unique set-up that perfectly matches your needs. As always, for advice on choosing your fittings, visit one of our stores or call 0845 345 5178 for expert advice.
