Custom Pressure Compensated PCB Drippers

Custom Pressure Compensated PCB Drippers

from £0.25

Hole Punch

£0.85
Increase Quantity Decrease Quantity

Delivery Pipe 4mm (Soft) - per metre

£0.45
Increase Quantity Decrease Quantity

PCB 2 Litre/hour

£0.60
Increase Quantity Decrease Quantity

PCB 8 Litre/hour

£0.60
Increase Quantity Decrease Quantity

Blue Fast Flow Drip Stake

£0.25
Increase Quantity Decrease Quantity
Overview

If a Topspin 12 is not suitable for the 25mm irrigation system that you wish to construct, then it is possible to create your own custom drippers using a few simple tools. Because of the high flow rate of the Professional AQ7000 25mm Pump, it is possible to use a PCB (Pressure Compensating Button) which only allows liquid to flow through it at a certain pressure and at the indicated flow rate. These can be attached to 25mm ZPE using our Quick Cut Hole Gun, and from there simple 4mm delivery pipe and a Fast Flow Blue Drip Stake will complete your dripper. These PCBs will not work with smaller pumps than the AQ7000 as they do not create enough pressure.

Q & A

Questions and Answers

Be the first to ask a question about this product.


Reviews