A larger size of the best selling Cool Shade reflector, the larger flow capacity offered by the 150mm (6") diameter allows use with a 150mm (6") Extractor fan for additional cooling. This allows use of this reflector with 1000 Watt lamps as well as increasing the number of reflectors that can be run in series from the same extractor fan. An additional clip on reflector is also supplied with the Cool Shade which improves your spread of light and reduces any light wastage. Multiple Cool Shades can be mounted in series along the same length of 150mm Flexible Aluminium Ducting although we would recommend a maximum of three shades when using an RVK150A1 Extractor Fan.

This magnificent modern adaptation of the original Sputnik reflector maximises utilisation of lumens as effectively as it transports heat away from your lamp. With a hugely successful reflector shape and 98% reflective Vega/Miro insert, our Sputnik2 simply will not be outshone by any other air-cooled units when judging on overall spread of light! Conveniently, it also comes fully assembled!

The fact that this ingenious all-in-one lighting system is trusted by legions of large-scale greenhouse growers speaks volumes for its impressively high standard of design and outstanding performance capabilities.

Right at the heart of everything sits the 600 Watt Philips GreenPower lamp – a premium-end dual spectrum model that has been specially developed for electronic ballasts, easily ranking up there with the longest lasting and most power efficient on the market.

Maximising the usefulness of the lamp output to full effect is the compact, creatively combined electronic ballast and reflector unit. Again innovative Philips technology plays a key role here, driving the completely enclosed, low heat emitting ballast as it powers the light from a position right next to the lamp-holder of the reflector. This unique set up firstly eliminates the issue of electromagnetic interference, which sometimes occurs as a result of running long wires between electronic ballasts and lamps. Secondly it lets the entire unit be suspended almost directly above plant tops, dramatically increasing the intensity of light fed to them and massively boosting growth rates. The Gavita Hortistar reflector completes the system and is a very smart piece of kit, showcasing a closed-end design and 96% reflective miro aluminium to deliver a bright, concentrated beam of light to your plants. In the unlikely event that a fault occurs, the unit will shut down and report to you the nature of the problem via the LED status indicator – a really cool feature!

When lamp, ballast and reflector are used together the Philips technology enables you to get 8% more usable light to your plants than any other 600 Watt kit! Although the price may appear expensive, it is offset by the tremendous quality of light output, lengthy product life span and low energy costs.

The sensational Silverstar Air Cooled Reflector needs no introduction… but we’ll give you one anyway! With strengthened glass sealed into the frame using advanced 3M adhesive tape, this exciting product stops heat escaping better than any other air cooled unit around to allow for seriously reduced distances between your light and plants. Already fully assembled and highly reflective on all four sides of the interior, the Silverstar reflector will deliver a wide and even spread of light whilst ensuring heat is promptly removed from the lamp area!

The Adjust-a-Wing Enforcer has quickly established itself as a fantastic alternative to the ultimate reflector - the original Adjust-a-Wing Avenger - especially when used in conjunction with a high quality bulb and ballast. To enable you to enjoy the best results possible we've put together this superb selection of attractive and affordable systems! Choose from the Proxima, Hobby and Exolux Dimmable range of ballasts, then set your expectations high because the Adjust-a-Wing Enforcer Reflector knows how to make every lumen count that's produced by the supplied dual spectrum lamp!

The original Cool Shade was one of the first air cooled reflectors to become available and all these years later it is still a firm favourite with many growers. Effectively a 125mm inline glass tube, the Cool Shade allows you to blow or extract air through the reflector and over your lamp - thus taking the heat away before it can raise the temperature in your grow room. An additional clip on reflector is also supplied with the Cool Shade which improves your spread of light and reduces any light wastage. Multiple Cool Shades can be mounted in series along the same length of 125mm Flexible Aluminium Ducting although we would recommend a maximum of three shades when using an RVK125A1 Extractor Fan.

These represent some of the best value light setups around! Featuring the excellent Proxima Euro Reflector, a veg-to-flower spectrum adjusted lamp and your choice of ballast from the excellent Proxima, Hobby and Exolux Dimmable ranges, Proxima Euro Lighting Systems really can’t be rivalled with when it comes to getting what you pay for - particularly on the grounds of quality and safety!

When you think about the parabolic reflectors that have previously tried (and failed) to make headway into the indoor growing market, words like “bulky”, “dangerous” and “poorly constructed” spring to mind. Clearly then it needed something a little bit special to buck this trend, and at long last the wait for such a product is over… introducing to you the OG Air Cooled Parabolic Reflector!