600 Watt 400V Gavita Pro E-Series Complete Lighting System

600 Watt 400V Gavita Pro E-Series Complete Lighting System

from £349.95

600 Watt 400V Gavita Pro E-Series 600e Complete Lighting System

  • Buy 2 for £334.95 each and save 5%
  • Buy 4 for £319.95 each and save 9%
  • Buy 6 for £309.95 each and save 12%
£349.95
Increase Quantity Decrease Quantity
Overview

BUY 2+ 600W 400V GAVITA PRO E-SERIES GROW LIGHTS FOR £334.95 EACH - A £15 SAVING PER UNIT!


BUY 4+ 600W 400V GAVITA PRO E-SERIES GROW LIGHTS FOR £319.95 EACH - A £30 SAVING PER UNIT!


BUY 6+ 600W 400V GAVITA PRO E-SERIES GROW LIGHTS FOR £309.95 EACH - A £40 SAVING PER UNIT!


GAVITA E-SERIES NOW ON DISPLAY IN ALL STORES 


Try Gavita’s NEW E-Series high-output, high frequency, 400V grow lights.


You’ll get 10 – 25% higher output for the same power – this means 8% more plant usable light.


They’re simple to set up. You won’t need a switchboard, contact or timer if you use a Gavita Master Controller - you can control up to 80 lighting systems at once..


Your lights will automatically switch on and off at your chosen time. When in sunrise and sunset mode, this’ll happen over a 30 minute period to ease plants in.


There’s no worry of overheating, short circuits or high inrushes – your Master Controller will take care of this!


High output, high frequency lamps
Connects with Gavita Master Controllers!
• Complete 3-in-1 ballast, reflector and lamp
• Pioneering 96% efficient, replaceable reflector
Brighter, cooler and far more efficient
• Jaw-dropping 10 – 25% increase in output
• Up to 10% higher yields than with standard lights
• Long-lasting – 5,000 hour lamp life expectancy
Dim or boost light output in 10W increments (50 – 100% range) when connected to the master controller
• Dim or boost manually when used without the master controller
Soft dim (light dims slowly to reduce stress)
Easy to use – it’s plug and play
Red LED status indicator
• Fully CE certified
• 600 Watts, 400 Volts
• Comes with a Gavita Pro 600W 400V EL E40/E39 lamp, 1120 µmol s-1
• Highest output 600W fixture in the market using 400V EL lamp
• Dim / Boost settings - 300/400/500/600/660W
• Lights more than 1 square metre per 1000 μmol m-2 s-1


Gavita products come with a 3 year warranty that we're happy to honour - just make sure you hang onto your recepit. 


 

The Tech

Gavita Pro E-Series 600 Watt Complete Grow Lights
• Input Voltage:230V-240V (± 10%)
• Input Current 1:2.75A (at 100%)
• Input Power 1:645W (at 100%)
• Input Current 2:3.0A (at 110%)
• Input Power 2:700W (at 110%)
• Power Factor:>0,98
• THD:<10%
• Input Frequency:50-60Hz
• Input Connection:IEC C14
• Adjustable:300/400/500/600/660W/EXT
• Case Temp. (°C):75
• Certification:CE
• External dim:Gavita Master controller analog protocol (<11,5V)
• External dim connector:RJ14 connector build in (6P4C)
• Article Number:18.30.64.23.10 (EU) | 18.30.64.24.11 (UK) | 18.30.74.23.12 (CH)
• EAN code:8718403053203 (EU) | 8718403053227 (UK) | 8718403053234 (CH)

Kit Contains

Details

Gavita Pro E-Series 600 Watt Complete Grow Lights

A) Gavita Pro 600e SE US fixture
• Electronic ballast
• Reflector bracket
• Lever to unlatch reflector
• Lamp socket
• Reflector Hortistar HR96 600 SE
• Mounting points
B) Three-way control cable splitter (3xRJ14)
C) 2x Interconnect/ drop cable (RJ14/RJ14 ) - Cable length: 1.5 m
D) Gavita Pro 600 W 400 V EL lamp
E) Power cord with either NEMA 5-15 or NEMA 6-15 plug

How to Use

It’s a simple to use – everything’s plug and play installation.


Preparing the fixture for use

• Switch off the mains power
• Install the lamp into the fixture (don’t touch it with your bare hands)
• Hang the lamp by its two mounting points)


Connecting the fixture to a Gavita Master Controller


• Use the RJ14 splitters to daisy chain up to 40 fixtures per controller port.
• Set the dials on the fixtures to EXT (External Control)
• Connect the controller to the included RJ14 splitter, using the controller’s connection cable
• Connect one output of the splitter to the RJ14 plug of the fixture by the interconnect cable
• The indicator light on the ballast will blink when the connection is successful
• Connect the other splitter output to the following RJ14 splitter with an interconnect cable
• Repeat this process to connect up to 40 ballasts per controller port


Connecting the fixture to the mains

• Ensure the cord is not coiled and does not touch any hot surfaces.
• Always use a double throw contactor suitable of switching a capacitive load
• Never use household timers to switch the fixture, unless protecting it with a contact!
• If a controller is used, ensure the controller is connected to the fixture.
• Plug the power cord into the mains.
• Switch on mains power.


We recommend using a timer (to automate on/off times), and a contact (to protect your timer).


Changing your reflector & lamp


• It's easy - see the above video!


Warning

• Never use the fixture without a lamp or reflector
• Run your lamps at 100% output for at least 100 hours before dimming them to stabilise your lamp
• Always disconnect the fixture from the mains and allow lamps to cool for 30 minutes before performing any maintenance
• Never touch your lamp with bare hands
• Avoid coiled cords
• Ensure the power cord and the controller cable do not touch the reflector
• If external switching gear is used, ensure it can cope with the inrush current of the fixture

Q & A

Questions and Answers

Be the first to ask a question about this product.


Reviews