Budget Cool Shade Lighting Systems

SKU# G319

Cool Shades were one of the first air cooled reflectors to become available and all these years later they are still a firm favourite with many growers. Effectively a 125mm inline glass tube, the Cool Shade allows you to blow or extract air through the reflector and over your lamp thus taking the heat away before it can raise the temperature in your grow room. An additional clip on reflector is also supplied with the Cool Shade which improves your spread of light and reduces any light wastage. Multiple cool shades can be mounted in series along the same length of 125mm Flexible Aluminium Ducting although we would recommend a maximum of three shades when using an RVK125A1 Extractor Fan.

» More information

Buy this product

Code		Price	Qty

1878	600 Watt Budget Cool Shade Proxima Light System	£109.95	Out of stock

2766	250 Watt Budget Cool Shade Hobby Light System	£109.95	Out of stock

2767	400 Watt Budget Cool Shade Hobby Light System	£119.95	Out of stock

2768	600 Watt Budget Cool Shade Hobby Light System	£129.95	Out of stock

8174	600 Watt Budget Cool Shade Exolux Dimmable Light System	£169.95	Out of stock

If you are interested in this product, then you might want to also order these at the same time: Exolux Ezi-Roll Light Hangers (pair) £8.45 Also add this 125mm (5") RVK125 A1 Extractor Fan - 250m3/hour (Matches Carbon Filter CF240) £69.95 Also add this
Availability: In stock

Overview: Cool Shade Reflectors are available to purchase as a reflector only, as part of a lighting system including reflector, ballast (Proxima, Hobby Control Gear or Exolux Dimmable) and a dual spectrum lamp or as part of a complete kit (see related items below) including both the lighting system and all of the extraction components. If you don't opt for the complete kit you will need an RVK125A1 Fan, 125mm Aluminium Ducting, a 125mm Fast Clamp and 125mm Duct Clips to get the light up and running.

Reviews & Ratings

Be the first to review this product

There are no reviews for this product yet. Be the first to share your experiences.

Close Window

Write a review

Tell us what you think about this product. Share your experiences with other people. All feedback is welcomed - good or bad.

*How do you rate this product?

	1 star	2 stars	3 stars	4 stars	5 stars
Rating

*Nickname
*Summary of Your Review
*Review
*Location
*Would you recommend this product to a friend?
Yes
No

* Required Fields

Questions and Answers (1)

1. What are the dimensions? 2. How effective would a carbon filter be when attached at one end and an extractor at the other end?

Written by AP | 19 Oct 2011

The Budget cool shade reflector is 48cm long, with a diameter of 12.5cm. If you are using a single coolshade, you could run a carbon filter in line, you would need to connect the filter to the fan, & blow this air through the coolshade. If you are using multiple coolshades, we would recommend using a separate extraction system, as you will need the full force of the fan going through the shades.